

Technical Specifications
- Weight - machine body (kg): Not available
- Dimensions - machine body (mm): Not available
- Engine: Not available
- Hoisting cable length (m): Not available
- Hoisting cable diameter (mm): Not available
- Maximum lifting height (m): Not available
- Hoisting cable diameter (mm): Not available
Performance
- Lifting speed (m/s): Not available
- Payload single traction (kN): Not available
- Pazload per hoisting winch (kN): Not available
- Payload total (kN): Not available
Control
- Technology: Not available
Brochure
- Download here: Not available
MAN Euro 5 truck with 500 HP, three axles, two of which are powered, with differential locks.
The traction rope winch features an automatic winding system, eliminating the need for an operator at the winch. It is mounted at the rear of the platform and can rotate 60° in both directions. The steel traction rope has a diameter of 12 mm and a length of 2500 m, reaching a speed of 10 m/s and a maximum pulling force of 5000 kg.
The system is operated via a radio remote control with the following features:
- Linearly adjustable pulling speed;
- Automatic operation both uphill and downhill via dedicated buttons, including 10 customizable support positions where the travel speed is adjusted;
- The trolley position in meters is displayed on the transmitter;
- Start and end points can be set, as well as the real-time location of the trolley.
The auxiliary winch with a synthetic rope of 3000 m in length can operate at a maximum speed of 5 m/s and achieve a maximum pulling force of 1500 kg.
In manual operation, only the necessary amount of rope is provided to the operator, ensuring that the rope remains neatly wound and avoiding tangles.
In closed-loop operation, the winch’s pulling force is controlled via the mooring system.
The winch can rotate 90° in both directions.
The tensioning winch, equipped with a steel rope of 12 mm in diameter and 300 m in length, can exert a maximum pulling force of 2500 kg and is particularly useful for tensioning the carrying rope.
On the carrying rope winch, up to 1800 m of rope with a 24 mm diameter can be wound.
This winch has a maximum pulling force of 2000 kg and can rotate 90° in both directions.
This winch system can be used with all types of lines (downhill, uphill, and flat) and achieves its maximum power when paired with the SEIK trolley SFM 20/40 or SFM 30/60.
For long timber or extreme terrains, it is advisable to integrate the system with the auxiliary trolley NL20/40 and the second lifting winch.